Menus and Submenus Basic Navigation • 6-1
6 Basic Navigation
Log into Site Supervisor by clicking the Main Menu
icon (three horizontal lines) in the upper left part of the
screen next to the Emerson Climate Technologies logo.
The Main Menu panel will slide open. Click to the right of
the panel to close.
The three icons at the first row along the top of the
screen are the Main Menu, Home, and the back arrow.
Refer to (Table 6-1) for icon descriptions.
6.1 Menus and Submenus
1. Login - Logs you into Site Supervisor. Click and
enter your username and password. Once logged
in, clicking Logout will log you back out of the
system. (You will automatically be logged out of
the system after a specified period of idle time.)
2. Home - Returns you to the set Home screen of
the Site Supervisor. Click the Home icon to
return to the Home screen from anywhere in the
system.
3. Summaries and Floor Plans - Four submenus
will display: Site Summaries, Alarms, Network,
and Floor Plans. Click each selection or drop-
down arrow (caret) to expand.
• Site Summaries - Shows the six system categories
and the number of applications that have been set
up in each category. Once a device or application is
selected, the main screen for that device or applica-
tion displays where control parameters may be con-
figured. Users can move devices and applications
under the category of their choosing.
• Refrigeration - Select to access devices and appli-
cations related to refrigeration. Default device ex-
amples and applications: XR and XC devices,
MRLDS and RLDS leak detectors, Anti-Sweat
controllers, CL ACC (anti-condensate control-
lers) and Standard Circuits.
• HVAC - Select to access devices and applications
related to HVAC. Default device examples and
applications: AHU, ARTC/RTU boards, HVAC
Zones, CC T-Stats, and MultiFlex RCB boards.
• Lighting - Select to access devices and applica-
tions related to Lighting Control. Default device
examples and applications: Lighting.
• Energy - Select to access devices and applications
related to Energy Control. Default device exam-
ples and applications: Demand Control, Energy
Meters, and Utility Monitoring.
• Other - Select to access devices and applications
related to this miscellaneous category. Default de-
vice examples and applications: Analog Combin-
er, Analog and Digital Sensors, Flex Combiner,
Irrigation, Loop Sequence, and Schedules.
• System - Select to access devices and applications
related to the System category. Default device ex-
amples and applications: 16AI, 4AO, 8DO, and
8RO boards, IPX Modules, Global Data, and On-
board IO.
• Alarms - The Active Alarms screen and Alarms
History can be accessed from this submenu. The
number of active alarms in the system and detailed
status information for each alarm is displayed on
the Active Alarms screen.
• Network - Displays all applications on the network.
• Floor Plans - Displays the Floor Plan screen where
you can select and work with floor plans.
4. Schedules - Displays events and timeline of
events in the system. When you click the Events
submenu, the event summary screen will display.
5. Systems Logs & Statistics - Contains controller
system information for technical personnel-level
users:
• System Logs:
• Service Log - Contains records of system-level
events, failures, and troubleshooting information,
including records of system shutdowns and start-
ups. Resetting or a cleanout of the Site Supervisor
can be performed from a submenu on this page.
• Program Error Log - Contains information about
assertions that occur in the controller. The system
records the assertion failure in ascending order.
• Alarm Communications Log - Contains custom
notification of alarm conditions or set default val-
ues for each device.
• Exception Log - Contains controller system infor-
mation for technical personnel such as process ID
and memory information.
• Audit Log - Contains a list of logs with event and
detail information.
• System Statistics:
• CPU Usage - Provides information for technical
service personnel about memory usage, CPU us-
age per time period, and load average usage since
the last reset (reboot) in the controller.
• Free Memory & Disk Space - Shows the
amount(s) of used and free memory and disk
space in the controller (total free and largest
block, by memory device).
To Next Page
Loading...
