4-6 • Site Supervisor Controller User Guide 2.0 026-1800 Rev 3 02-AUG-2016
4.4 Dip Switch
Configuration
4.5 Site Supervisor
Display Screens
Once the Site Supervisor display has been powered up,
the first screen that appears is the Emerson launch screen
below (Figure 4-8). It will appear for five seconds:
User Permission Settings
View Only - View only (no overriding or editing).
Lowest permission setting.
Manager - Viewing and Overriding permissions.
Tech - Viewing, overriding, and editing permissions.
Highest permission setting.
Your login type will display in the lower right corner
of the display under the BACK button.
Figure 4-6
- Dip Switch Configuration
Figure 4-7 - Keypad - Back, Delete, and SUBMIT
Figure 4-8 - Launch Screen
Figure 4-9 - Select A User Type and Log In
Figure 4-10 - Logged In As User Type and Entering Password
To Next Page
Loading...
