Emerson Site Supervisor - Status and Detail Screen

OnBoard I/O Software Overview • 5-21
5.9.3 Status and Detail Screen
The Onboard I/O status screen, contains the following
information:
• Relays status
• Digital inputs status
• Analog inputs status.
• General status
• Setup status
• Inputs status
• Outputs status
• Invert status
Description Size Limits
0 Conf Probe 1 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
1 Conf Probe 2 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
2 Conf Probe 3 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
3 Conf Probe 4 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
4 Conf Probe 5 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
5 Conf Probe 6 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
6 Conf Probe 7 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
7 Conf Probe 8 4 bit ntc(0) - Ptc(1) - 2/20mA(2) - 4/20mA(3) - 0/10V(4) - 0/1V(5) - 0/5V(6) - DIG(7)-e_ntc(8)
8 Conf DI1 4 bit Normal DI (0) - Pulse Counter (1)
9 Conf DI2 4 bit Normal DI (0) - Pulse Counter (1)
10 Conf DI3 4 bit Normal DI (0) - Pulse Counter (1)
11 Conf DI4 4 bit Normal DI (0) - Pulse Counter (1)
Table 5-3 - Size and Limits of the Inputs and Outputs
Figure 5-3 - Onboard I/O Status Screen
Figure 5-4 - Onboard I/O Status Screen