Basic Screen Parts and Elements Basic Navigation • 6-3
6.3 Basic Screen Parts and
Elements
• Main display - This is the main section of the
screen, which contains and displays the content of
the chosen selection such as reports, device infor-
mation, configuration settings, and more.
• Main Menu (three horizontal lines) - When
clicked, the Main Menu panel will slide open con-
taining the menus and submenus of the controller.
• Home button - Returns you to the default Home
screen of the controller.
• Back button - This button will return you to the
previous screen. The Back button is indicated by a
left arrow icon.
• Active Alarms icon (red circle with exclamation
mark) - When this icon is clicked, the screen will
display the current active alarms. The number of
alarms is displayed in parentheses next to the excla-
mation mark.
6.4 Language Settings
The default for the language selection is English
(United States). The system will store a setting for the
preferred system language (internal language code). This
is used when no authorized user is logged in. The default
language is used as a fall back when the currently active
preferred language doesn’t contain a translation for the
given label, prompt, or display text.
To change the language setting:
1. Log into the Site Supervisor controller.
2. Click the Main Menu icon.
3. Click Configure System> General System
Properties> Localization.
4. Choose the preferred language on the Language
drop-down menu.
5. An Information box will appear, click OK to
confirm the language change.
6. Click the Save button.
7. The Confirmation pop-up box will appear on the
screen showing the summary of changes, click
OK or Cancel button.
Supported languages in Site Supervisor:
• English (United States)
Future release language support:
• Spanish (Español)
• Portuguese (Brazil) - Portuguȇs (Brasil)
• Italian (Italy) - Italiano (Italia)
• German (Germany) - Deutsch (Deutschland)
• French (France) - Francais (France)
• Chinese (Simplified)
6.5 Locating Applications
Applications in the controller are located on the Home
screen and from individual application screens and are
easy to find.
Each of the five categories can be seen on the Home
screen and if applications have been set up, they will dis-
play under the category to which they have been assigned.
For example, in Figure 6-2 all of the five categories are
displayed with Refrigeration containing two applications
that have been set up. Choose an application and the cate-
gories will then be displayed as icons across the top that
are easily accessible. Click the icons to see the applica-
NOTE: When some screen information and
contents are clicked, additional or related
information can be displayed or additional
screens accessed.
To Next Page
Loading...
