Emerson Site Supervisor User Manual

Technical Specifications Hardware Overview • 1-1
1Hardware
Overview
Site Supervisor (P/N 860-1200) is a system that
combines energy management with the ability to monitor
various facility systems and provide alerts when there are
issues that need attention. This system provides HVAC
control, Refrigeration System Monitoring and Control, as
well as Lighting Control. In addition, the Site Supervisor
can monitor and report energy consumption and take
action to reduce the energy demand during peak periods.
This can have a direct impact on utility bills by reducing
total energy costs. Site Supervisor ensures that the HVAC
and lighting systems are on and off at the appropriate
times. This ability to monitor store conditions can
potentially minimize energy consumption.
1.1 Technical
Specifications
1.2 Housing Dimensions
and Mounting
The Site Supervisor is DIN Rail mounting compatible.
Snap the orange tabs to the down position to fasten. If not
using the DIN Rail mounting option, fasten to the
mounting surface using the openings in the mounting tabs.
Operating
Temperature
14°F to 140°F (-10°C to
60°C)
Relative Humidity 20-85% RH non-
condensing
Enclosure Rating UL 94 V-0
Dimensions 103.7 x 34.7mm
24 VAC 20VA required
24VAC/20VA
1 Can Bus Expansion Module
Connections Only
4 RS485 ports MODBUS Com Ports 1, 2,
3, and 4 (Site Supervisor
Display)
3 Ethernet ports Ports 1, 1, 0
Analog Inputs 8
2 USB Ports 1, 2
MicroSD 1
Table 1-1
- Site Supervisor Specifications
Digital Inputs 4
Relay Outputs 4
Agency Approvals ULE211299, CE
Figure 1-1
- Site Supervisor Housing Dimensions and
Mounting
NOTE: Dimensions below can be DIN Rail
mounted or attached via the mounting pads.
NOTE: The Can Bus port is for expansion I/O
such as the IPX206D and IPX225D.
Table 1-1
- Site Supervisor Specifications

Emerson Site Supervisor Specifications

General

Brand	Emerson
Model	Site Supervisor
Category	Controller
Language	English