ENCAD CADJET - Line Quality Degraded

Troubleshooting 4-13
CadJet 3D Service Manual
Symptoms Possible cause Solution
Table 4-1. Troubleshooting Table (cont).
TROUBLE-
SHOOTING
Line Quality
Degraded
• ink cartridges clean and prime
dirty or clogged ink cartridges
• cartridge dimple clean or replace
region dirty or cartridge
damaged
• color calibration perform Color
needed Calibration
• deadband perform Deadband
calibration needed Calibration
(in bidirectional
printing mode)
• debris or clean slide shaft
lubrication on
slide shaft
• leaks or bubbles 1) reseal/prime ink
in ink delivery delivery lines on
lines both sides
2) replace ink
delivery lines
• dirty encoder clean encoder strip
strip
• carriage replace carriage
bushings worn bushings
• drive belt worn replace drive belt