EasyManua.ls Logo

Endress+Hauser analytikjena PlasmaQuant 9100 - Requirements for the Operating Personnel; Safety Instructions, Transport and Commissioning

Endress+Hauser analytikjena PlasmaQuant 9100
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security PlasmaQuant 9100 (Elite)
8
Notice symbol Meaning Comment
People's Republic of
China only:
This device contains controlled sub-
stances. Analytik Jena guarantees that
these substances will not escape the de-
vice in the next 25 years if operated in
accordance with its intended purpose.
The following notice sign is attached to the rear of the device:
Caution! Power is still connected even when the device is switched off!
Caution! Power is still connected even when the device is switched off!
Unplug the power cable before opening!
Unplug the power cable before opening!
Only connect or disconnect accessories when the device is switched off!
Only connect or disconnect accessories when the device is switched off!
2.2 Requirements for the operating personnel
The device must only be operated by qualified specialist personnel instructed in the
use of the device. This instruction also include teaching the contents of this user
manual and of the user manuals of the connected system components. We recom-
mend training by qualified employees of Analytik Jena AG
or its representatives.
In addition to the safety instructions in this user manual, the general applicable
safety and accident prevention regulations of the respective country the device is op-
erated in must be observed and adhered to. The operator must ensure the latest ver-
sion of these regulations.
The user manual must be accessible to the operating and service personnel.
2.3 Safety instructions, transport and commissioning
Incorrect installation can create serious hazards. This may result in electric shock and
explosion if the gases are not connected correctly.
¡ Only the Analytik Jena AG customer service or specialist personnel trained and
authorized by them is allowed to install and commission the device and its sys-
tem components.
¡ Unauthorized assembly and installation is not permitted.
Insufficiently secured components pose a risk of injury.
¡ During transport, secure the device components as specified in these operating
instructions.
¡ Loose parts must be removed from the system components and packed sepa-
rately.
To prevent personal injury, the following must be observed when moving the device
in the laboratory (lifting and carrying):
¡ Use a lift truck to transport the device.
¡ Four people positioned on the sides of the device are required to carry the device
by four firmly mounted carrying handles.
¡ Risk of damage to health due to improper decontamination! Perform a profes-
sional and documented decontamination of the device before returning it to
Analytik Jena AG
.

Table of Contents

Related product manuals