EasyManua.ls Logo

Endress+Hauser analytikjena PlasmaQuant 9100 - 10.2 Guidelines and Standards

Endress+Hauser analytikjena PlasmaQuant 9100
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications PlasmaQuant 9100 (Elite)
86
Accessories for quick sample
supply
Cetac ASXPress Plus Dimensions
(W x H x D)
Switching valve
Control unit
58 mm x 128 mm x 217 mm
83 mm x 254 mm x 200 mm
Mass
Switching valve
Control unit
1.3 kg
1.4 kg
Electrical connection data
The electrical connection data applies for all accessories listed.
Voltage 100 to 240 V (power supply unit)
24 V (accessory operating voltage)
Frequency 47 to 63 Hz
Interfaces USB
RS 232
10.2 Guidelines and standards
Protection class and protection
type
The device is protection class I. The housing is protection type IP 20.
Device safety
The device complies with the following safety standards
¡ EN 61010-1
¡ ISO 9022-32-03-0
EMC compatibility
The device has been tested for radio interference elimination and interference immunity
and fulfills the requirements of EN 61326-1
.
Environmental compatibility
The device has been tested for environmental compatibility and meets the requirements
according to
¡ ISO 9022-2
¡ ISO 9022-3
¡ ISO 9022-32-03-0
EU directives
The device meets the requirements of the directive 2011/65/EU.
The device is designed and tested in accordance with standards meeting the require-
ments of EU directives 2014/35/EU
and 2014/30/EU. The device leaves the factory in a
sound condition with regard to technical safety. To maintain this condition and to en-
sure safe operation, the user must strictly observe the safety and operating instructions
contained in this operating manual. For accessories delivered with the device and sys-
tem components from other manufacturers, the information provided in their respective
operating manuals has priority.
Guidelines for China
The device contains substances subject to regulation (according to the directive
"Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products"). Analytik Jena AG guarantees that, if the device is
used as intended, these substances will not leak within the next 25
years and therefore
will not pose a threat to the environment or health within this time period.

Table of Contents

Related product manuals