EasyManua.ls Logo

Endress+Hauser analytikjena PlasmaQuant 9100 - Page 83

Endress+Hauser analytikjena PlasmaQuant 9100
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PlasmaQuant 9100 (Elite) Specifications
83
Display types
Emission Counts (ct)
Intensity Counts/second (ct/s)
Concentration 5-digit value range (0.0001 to 99999), unit freely selectable
Signal evaluation
Spectral resolu-
tion
Spectra widths of 20 to 200 pixels
Analytical data
Sample type Liquid
Type of nebulizer Concentric nebulizer
Spray chamber Cyclone chamber
Power supply
Voltage 230 V ±10%
Frequency 50/60 Hz
Typical average power con-
sumption
4500 VA
Maximum current consump-
tion
32 A
Fuse protection (grid side) 32 A
Device fuses
Fuse Type Protected circuit
S1 10 A NFC 10x38 gG AC, 400 V Spectrometer
S2 6 A NFC 10x38 gG AC, 400 V Tube heating generator
S3 25 A NFC 10x38 gG AC, 400 V Generator power supply
unit
Safety circuits
Monitoring ¡ Plasma chamber door closing
¡ Torch working position
¡ Cooling
¡ Argon supply
¡ Plasma (optical monitoring)
Gas supply
Gas Inlet pressure Total consumption
Argon ≥ 4.6
Permissible components:
Oxygen ≤ 3 ppm
Nitrogen ≤ 10 ppm
Hydrocarbons ≤ 0.5 ppm
Moisture ≤ 5 ppm
600 kPa (6 bar) 13 to 21 l/min
Oxygen ≥ 4.5
(as optional auxiliary gas)
600 kPa (6 bar) ≤ 0.04 l/min

Table of Contents

Related product manuals