Endress+Hauser Gammapilot FMG50 - 12 Certificates and Approvals; 12.1-12.3 Safety and Ex Approvals; 12.4-12.8 Standards, Certificates, and Markings

Gammapilot FMG50 Certificates and approvals
Endress+Hauser 105
12 Certificates and approvals
The availability of approvals and certificates can be called up daily via the Product
Configurator.
12.1 Functional safety
SIL 2/3 according to IEC 61508, see:
"Functional Safety Manual"
FY01007F
12.2 Heartbeat Monitoring + Verification
Heartbeat Technology offers diagnostic functionality through continuous self-monitoring,
the transmission of additional measured variables to an external Condition Monitoring
system and the in-situ verification of measuring devices in the application.
Special Documentation "Heartbeat Monitoring + Verification"
SD02414F
12.3 Ex approval
The Ex certificates available are listed in the ordering information. Observe the related
Safety Instructions (XA) and Control Drawings (ZD).
12.3.1 Explosion-protected smartphones and tablets
Only mobile end devices with Ex approval may be used in hazardous areas.
12.4 Other standards and guidelines
• IEC 60529
Degrees of protection provided by enclosures (IP code)
• IEC 61010
Safety requirements for electrical equipment for measurement, control and laboratory
use
• IEC 61326
Interference emission (Class B equipment), interference immunity (Annex A – Industrial
area)
• IEC 61508
Functional safety of safety-related electric/electronic/programmable electronic systems
• NAMUR
Association for Standards for Control and Regulation in the Chemical Industry
12.5 Certificates
The certificates are available via the Product Configurator:
www.us.endress.com/en/field-instruments-overview/product-finder -> Select product ->
Configure