Endress+Hauser Gammapilot FMG50 - 6 Operation; 6.1 HART Operating Options Overview

Gammapilot FMG50 Operation
Endress+Hauser 41
6 Operation
6.1 Overview of the HART operating options
6.1.1 Via HART protocol
1 4 5 7
9
6 8
2
3
10
A0039185
 12 Options for remote operation via HART protocol
1 PLC (programmable logic controller)
2 Transmitter power supply unit, e.g. RN221N (with communication resistor)
3 Connection for Commubox FXA191, FXA195 and Field Communicator 375, 475
4 Field Communicator 475
5 Computer with operating tool (e.g. DeviceCare/FieldCare , AMS Device Manager, SIMATIC PDM)
6 Commubox FXA191 (RS232) or FXA195 (USB)
7 Field Xpert SFX350/SFX370
8 VIATOR Bluetooth modem with connecting cable
9 RIA15
10 Transmitter
6.1.2 Operation via FieldCare/DeviceCare
FieldCare/DeviceCare is an Endress+Hauser asset management tool based on FDT
technology. With FieldCare/DeviceCare you can configure all Endress+Hauser devices as
well as devices from other manufacturers that support the FDT standard. Hardware and
software requirements can be found on the Internet:
www.de.endress.com -> Search: FieldCare -> FieldCare ->Technical data
FieldCare supports the following functions:
• Configuration of transmitters in online mode
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB interface of a computer
• Commubox FXA291 via the service interface
6.1.3 Operation via RIA 15 (remote display)
Loop-powered process indicator to display HART or 4 to 20 mA signals
6.1.4 Operation via WirelessHART
SWA70 WirelessHART adapter with the Commubox FXA195 and the "FieldCare/
DeviceCare" operating program