Operating menu and parameter description iTEMP TMT82
110 Endress+Hauser
Factory setting 2000
13.3.5 "Diagnostics" submenu
"Diagnose list" submenu
Detailed description → 87
"Event logbook" submenu
Detailed description → 88
"Device information" submenu
Extended order code 1-3
Navigation Expert → Diagnostics → Device information → Extended order code 1-3
Description Use this function to display the first, second and/or third part of the extended order code.
On account of length restrictions, the extended order code is split into a maximum of 3
parameters.
The extended order code indicates the version of all the features of the product structure
for the device and thus uniquely identifies the device. It can also be found on the
nameplate.
Uses of the extended order code
• To order an identical spare device.
• To check the ordered device features using the delivery note.
ENP version
Navigation Expert → Diagnostics → Device information → ENP version
Description Displays the version of the electronic nameplate.
Display 6-digit number in the format xx.yy.zz
Device revision
Navigation Expert → Diagnostics → Device information → Device revision
Expert → Communication → HART info → Device revision
Description Use this function to view the device revision with which the device is registered with the
HART FieldComm Group. It is needed to assign the appropriate device description file (DD)
to the device.
Display 2-digit hexadecimal number
To Next Page
Loading...
