iTEMP TMT82 Operating menu and parameter description
Endress+Hauser 111
Manufacturer ID→ 103
Navigation Expert → Communication → HART info → Manufacturer ID
Expert → Diagnostics → Device information → Manufacturer ID
Manufacturer
Navigation Expert → Diagnostics → Device information → Manufacturer
Description Displays the manufacturer name.
Hardware revision
Navigation Expert → Diagnostics → Device information → Hardware revision
Expert → Communication → HART info → Hardware revision
Description Use this function to display the hardware revision of the device.
"Measured values" submenu
Sensor n raw value
n = Stands for the number of sensor inputs (1 and 2)
Navigation Expert→ Diagnostics → Measured values → Sensor n raw value
Description Use this function to display the non-linearized mV/Ohm value at the specific sensor input.
"Min/max values" submenu
Detailed description → 90
"Simulation" submenu
Detailed description → 92
To Next Page
Loading...
