Endress+Hauser Levelflex FMP53 - Page 160

Description of device parameters (operating menu) Levelflex FMP51, FMP52, FMP54
160 Endress+Hauser
Factory setting
0
Out value
Navigation
Setup ® Advanced setup ® Digital output 1...4 ® Out value
Diagnose ® Measured value ® Digital output 1...4 ® Out value
Description
Displays the current output value of the block.
Out status
Navigation
Setup ® Advanced setup ® Digital output 1...4 ® Out status
Diagnose ® Measured value ® Digital output 1...4 ® Out status
Description
Displays the current status of the output value of the block.
Display options
• Good
•
Uncertain
• Bad
Out status HEX
Navigation
Setup ® Advanced setup ® Digital output 1...4 ® Out status HEX
Diagnose ® Measured value ® Digital output 1...4 ® Out status HEX
Description
Displays the hexadecimal status of the output value of the block.
Additional information
The hexadecimal code give more detailed information on the device state than the Out status
parameter.
For the meaning of the hexadecimal code refer to BA00034S, "PROFIBUS DP/PA - Guidelines for
planning and commissioning".