Endress+Hauser Levelflex FMP53 - Calling up Remedial Measures; Diagnostic Event in the Operating Tool

Levelflex FMP51, FMP52, FMP54 Trouble shooting
Endress+Hauser 87
11.2.2 Calling up remedial measures
Message for remedial measures
4
2
5
X X X X X X XX X X X X X X X XX X
S441
S
S
mA
i
1
3
20.50
S441
2d1
1h05m55s
(ID:153)
1.Checkprocess
2.Checkcurrentoutputsettings
Curr.output1
Curr.output1
A0013940-EN
1
2
3
4
5
Event text
Symbol for event level with diagnostic event
Event ID for service
Operation time of occurrence
Remedial measures
The user is in the diagnostic message.
1.
Press the O key ( symbol).
Ã
The message for the remedial measures for the diagnostic event opens.
2.
Press S + O simultaneously.
Ã
The message about the remedial measures closes.
11.3
Diagnostic event in the operating tool
If a diagnostic event is present in the operating tool, the status signal appears in the top left status
area along with the corresponding symbol for event level in accordance with NAMUR NE 107:
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)