Endress+Hauser Levelflex FMP53 - The Setup menu; Operating mode

Description of device parameters (operating menu) Levelflex FMP51, FMP52, FMP54
116 Endress+Hauser
Factory setting
30 %
Display interval
Navigation
Display/operation ® Display interval
Setup ® Advanced Setup ® Display ® Display interval
Description
Use this function to set the length of time the measured values are displayed if the values
alternate on the display. This type of alternating display only occurs automatically if the number of
measured values defined exceeds the number of values the selected display format can display
simultaneously.
• The Value 1 display - Value 4 display parameters are used to specify what measured
values are shown on the display (® ä 161).
•
The display format of the displayed measured values is specified using the Format display
parameter (® ä 113).
Input range
1 to 10 s
Facotry setting
5 s
18.2 "Setup" menu
Operating mode
Navigation
Setup ® Operating mode
Conditions
Only visible for devices with "interface measurement" application package (product structure:
Feature 540 "Application package", Option EB "Interface measurement").
Description
Defines the operating mode
Selection
• Level
•
Interface
Factory setting
Level
Distance unit
Navigation
Setup ® Distance unit
Description
Defines the distance unit