Endress+Hauser Levelflex FMP53 - Setting the Operating Language; Setting the Operating Language Via the Display Module; Setting the Language Via Operating Tool (Fieldcare); Checking the Reference Distance

Commissioning via operating menu (On-site display, FieldCare) Levelflex FMP51, FMP52, FMP54
78 Endress+Hauser
10.4 Setting the operating language
10.4.1
Setting the operating language via the display module
E E
E
+
1. 4.
2. 5.
3.
A0013637
10.4.2
Setting the language via operating tool (FieldCare)
A0015305-EN
10.5
Checking the reference distance
This section is only valid for FMP54 with gas phase compensation (product structure: feature
540 "Application Package", option EF or EG).
Coax probes with gas phase compensation are calibrated on delivery. Rod probes, on the other
hand, must be recalibrated after mounting: