Endress+Hauser Levelflex FMP53 - Display interval; Display damping

Levelflex FMP51, FMP52, FMP54 Description of device parameters (operating menu)
Endress+Hauser 165
Description
Use this function to specify the number of decimal places for measured value 4. This setting does
not affect the measuring or computational accuracy of the device. The arrow displayed between
the measured value and the unit indicates that the device computes with more digits than are
shown on the local display.
Selection
• x
•
x.x
• x.xx
• x.xxx
• x.xxxx
Factory setting
x.xx
Display interval
(® ä 116)
Display damping
Navigation
Setup ® Advanced setup ® Display ® Display damping
Description
Use this function to set the reaction time of the local display to fluctuations in the measured value
caused by process conditions. A time constant is entered for this purpose: if a low time constant is
entered, the display reacts very quickly to fluctuating measured variables. If a high time constant
is entered, the display reaction is damped.
Input range
0 to 999 s
Factory setting
0 s
Header
Navigation
Setup ® Advanced setup ® Display ® Header
Description
Use this function to select the contents of the header of the local display. The header text only
appears during normal operation.
1
XXXXXXXXX
A0013375
1 Position of the header text on the display
Options
• Device tag
•
Free text
Factory setting
Device tag