Endress+Hauser Levelflex FMP53 - Page 19

Levelflex FMP51, FMP52, FMP54 Incoming acceptance and product identification
Endress+Hauser 19
060 Probe:
FMP
51 52 54
BD ..... inch, rod 0.63in 316L, 40 inch divisible x x
CA ..... mm, rod 16mm PFA>316L x
CB ..... inch, rod 0.63in PFA>316L x
LA ..... mm, rope 4mm 316 x x
LB ..... inch, rope 1/6" 316 x x
MB ..... mm, rope 4mm 316, max 300mm nozzle height, center rod x
MD ..... inch, rope 1/6" 316, max 12inch nozzle height, center rod x
OA ..... mm, rope 4mm PFA>316, max 150mm x
OB ..... mm, rope 4mm PFA>316, max 300mm x
OC ..... inch, rope 1/6" PFA>316, max 6inch x
OD ..... inch, rope 1/6" PFA>316, max 12inch x
UA ..... mm, coax 316L x x
UB ..... inch, coax 316L x x
UC ..... mm, coax AlloyC x
UD ..... inch, coax AlloyC x
YY Special version, TSP-no. to be sepc. x x x
090 Seal:
FMP
51 52 54
A4 Viton, -30...150°C x
B3 EPDM, -40...120°C x
C3 Kalrez, -20...200°C; saturated steam max. 150°C x
D1 Graphite, -196...280°C (XT); saturated steam max. 200°C x
D2 Graphite, -196...450°C (HT) x
Y9 Special version, TSP-no. to be sepc. x x x
100 Process connection:
FMP
51 52 54
AAJ 2" 300/600lbs RF, 316/316L flange ANSI B16.5 (CRN) x
ABJ 3" 300/600lbs RF, 316/316L flange ANSI B16.5 (CRN) x
AEJ 1-1/2" 150lbs RF, 316/316L flange ANSI B16.5 (CRN) x
AEK 1-1/2" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN) x
AEM 1-1/2" 150lbs, AlloyC>316/316L flange ANSI B16.5 (CRN) x
AFJ 2" 150lbs RF, 316/316L flange ANSI B16.5 (CRN) x x
AFK 2" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN) x
AFM 2" 150lbs, AlloyC>316/316L flange ANSI B16.5 (CRN) x
AGJ 3" 150lbs RF, 316/316L flange ANSI B16.5 (CRN) x x
AGK 3" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN) x
AGM 3" 150lbs, AlloyC>316/316L flange ANSI B16.5 (CRN) x
AHJ 4" 150lbs RF, 316/316L flange ANSI B16.5 (CRN) x x
AHK 4" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN) x
AJJ 6" 150lbs RF, 316/316L flange ANSI B16.5 (CRN) x
AJK 6" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN) x