EasyManua.ls Logo

Endress+Hauser Levelflex FMP53 - Page 23

Endress+Hauser Levelflex FMP53
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Levelflex FMP51, FMP52, FMP54 Incoming acceptance and product identification
Endress+Hauser 23
580
Test, Certificate: (Multiple options can be selected)
FMP
51 52 54
KG 3.1 Material certificate+PMI test (XRF) internalprocedure, wetted metallic parts, EN10204-3.1
inspection certificate
x x
KP Liquid penetrant test AD2000-HP5-3(PT), wetted/pressure retaining metallic parts, inspection
certificate
x x
KQ Liquid penetrant test ISO23277-1 (PT), wetted/pressure retaining metallic parts, inspection
certificate
x x
KR Liquid penetrant test ASME VIII-1 (PT), wetted/pressure retaining metallic parts, inspection
certificate
x x
KS WPQR, WPS to ISO15614/ASME IX/Norsok, wetted/pressure retaining metallic parts x x
K9 Special version, TSP-no. to be sepc. x x x
590
Additional Approval: (Multiple options can be selected)
FMP
51 52 54
LA SIL x x x
LC *WHG overfill prevention x x x
L9 Special version, TSP-no. to be sepc. x x x
600
Probe Design: (Multiple options can be selected)
FMP
51 52 54
MB Sensor remote, 3m/9ft cable, detachable+mounting bracket x x x
M9 Special version, TSP-no. to be sepc. x x x
610
Accessory mounted: (Multiple options can be selected)
FMP
51 52 54
NC Gas-tight feed through x x
OA Rod center washer d=75mm/2.95", 316L pipe diameter DN80/3" + DN100/4" x x
OB Rod center washer d=45mm/1.77", 316L pipe diameter DN50/2" + DN65/2-1/2" x x
OC Rope center washer d=75mm/2.95", 316L pipe diameter DN80/3" + DN100/4" x x
OD Rod center washer d=48-95mm/1.88-3.74", PEEK, interface measurement, pipe diameter
DN50/2" to DN100/4"
x x
OE Rod center washer d=37mm/1.45", PFA, interface measurement, pipe diameter DN40/1-1/2"
+ DN50/2"
x x x
O9 Special version, TSP-no. to be sepc. x x x
620
Accessory enclosed: (Multiple options can be selected)
FMP
51 52 54
PB Weather protection cover x x x
PG Mounting kit, insulated, rope x
R9 Special version, TSP-no. to be sepc. x x x
850 Firmware Version:
FMP
51 52 54
75 01.01.zz, HART, DevRev02 x x x
76 01.00.zz, FF, DevRev01 x x x
77 01.00.zz, PROFIBUS PA, DevRev01 x x x
78 01.00.zz, HART, DevRev01 x x x

Table of Contents

Other manuals for Endress+Hauser Levelflex FMP53

Related product manuals