Operation options Proline Promass E 100 Modbus RS485
42 Endress+Hauser
Access is via:
CDI service interface → 41
Typical functions:
• Configuring parameters of transmitters
• Loading and saving device data (upload/download)
• Documentation of the measuring point
• Visualization of the measured value memory (line recorder) and event logbook
For additional information about FieldCare, see Operating Instructions BA00027S
and BA00059S
Source for device description files
See information → 44
Establishing a connection
1. Start FieldCare and launch the project.
2. In the network: Add a device.
The Add device window opens.
3. Select the CDI Communication FXA291 option from the list and press OK to
confirm.
4. Right-click CDI Communication FXA291 and select the Add device option in the
context menu that opens.
5. Select the desired device from the list and press OK to confirm.
6. Establish the online connection to the device.
For additional information, see Operating Instructions BA00027S and BA00059S
To Next Page
Loading...
