Endress+Hauser Proline Promass F 500 - Page 142

Operation Proline Promass F 500 Modbus RS485
142 Endress+Hauser
‣
Output values
→  145
‣
Totalizer
→  143
11.4.1 "Measured variables" submenu
The Measured variables submenu contains all the parameters needed to display the
current measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
→  142
Volume flow
→  142
Corrected volume flow
→  143
Density
→  143
Reference density
→  143
Temperature
→  143
Pressure value
→  143
Concentration
→  143
Target mass flow
→  143
Carrier mass flow
→  143
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  95).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  96).
Signed floating-point
number