Endress+Hauser Promag 53 - Accessories

Promag 53 PROFIBUS-DP/-PA 8 Accessories
Endress+Hauser 111
8 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are avail-
able for the transmitter and the sensor. The E+H service organisation can provide
detailed information on the order codes of your choice.
Accessory Description Ordering code
Transmitter
Promag 53
Transmitter for replacement or for stock. Use
the order code to define the following specifi-
cations:
– Approvals
– Degree of protection / version
– Cable type for the remote version
– Cable entries
– Display / operation
– Software
53XXX
− XXXXX * * * * * * * *
Software package for
Promag 53
Software add-ons on F-Chip™, can be
ordered individually:
– Extended diagnosis
– Electrode Cleaning Circuitry (ECC)
DK5SO – *
Mounting kit for
transmitter
Mounting set for wall mounted transmitter
housing. Suitable for:
– Wall mounting
– Pipe mounting
– Installation in control panel
DK5WM
− *
Cable for remote version Coil and signal cables, various lengths.
Reinforced cable on request.
DK5CA
− * *
Grounding cable for
Promag W/P
Set consists of two grounding cables. DK5GC
− * * *
Grounding disk for
Promag W, P
Grounding disk for potential equalisation DK5GD – * * * *
Mounting kit for
Promag H
Mounting kit for Promag H, comprising:
– 2 process connections (see Page 160 ff.)
– Threaded fasteners
– Seals
DKH * *
− * * * *
Adapter connection for
Promag A/H
Adapter connections for installing
Promag 53 H instead of a Promag 30/33 A or
Promag 30/33 H / DN 25.
DK5HA
− * * * * * *
Ground rings for
Promag H
If the process connections are made of PVC
or PVDF, ground rings are necessary to
ensure that potential is matched.
Set of ground rings, comprising:
– 2 ground rings
– 2 seals
DK5HR
− * * * *
Set of seals for
Promag H
For regular replacement of the seals of the
Promag H sensor.
DK5HS
− * * *
Wall mounting kit for
Promag H
Wall-mounting kit for the Promag H sensor DK5HM
− * *
Welding jig for
Promag H
Weld nipple as process connection:
welding jig for installation in pipe.
DK5HW
− * * *