Endress+Hauser Promag 53 - Device Certification and Trademarks

Promag 53 PROFIBUS-DP/-PA 2 Identification
Endress+Hauser 9
2.3 Device certification PROFIBUS-DP/-PA
The Promag 53 flowmeter has passed all the test procedures implemented and has
been certified and registered by the PNO (PROFIBUS User Organisation). The device
thus meets all the requirements of the specifications listed below:
• Certified for PROFIBUS 3.0
Device certification number: upon request
• The instrument meets all of the PROFIBUS 3.0 specifications.
• The device may also be operated using certified devices from other manufacturers
(interoperability).
2.4 Registered trademarks
KALREZ
®
, VITON
®
and TEFLON
®
are registered trademarks of E.I. Du Pont de Nemours & Co., Wilmington, USA
TRI-CLAMP
®
is a registered trademark of Ladish & Co., Inc., Kenosha, USA
PROFIBUS
®
is a registered trademark of PROFIBUS Nutzerorganisation e.V., Karlsruhe, D
S-DAT™, T-DAT™, F-Chip™, FieldTool™, FieldCheck™, Applicator™
are registered trademarks of Endress+Hauser Flowtec AG, Reinach, CH