10 Technical data Promag 53 PROFIBUS-DP/-PA
168 Endress+Hauser
10.11 Process connections of Promag H (DN 40...100)
Front view of sensor Promag H / DN 40...100 (without process connection)
Fig. 78: Dimensions front view of sensor DN 40...100
DN A B C D E F G H L K
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Threaded holes
40 122.0 86 71.0 51.0 35.3 M 8 15 18 – 4
50 147.0 99 83.5 63.5 48.1 M 8 15 18 – 4
65 147.0 115 100.0 76.1 59.9 M 8 15 18 6 –
80 197.0 141 121.0 88.9 72.6 M 12 15 20 – 4
100 197.0 162 141.5 114.3 97.5 M 12 15 20 6 –
F06-5xHxxxxx-06-05-08-xx-001
To Next Page
Loading...
