Promag 53 PROFIBUS-DP/-PA
2 Endress+Hauser
Brief operating instructions
These brief operating instructions show you how to configure the measuring device
quickly and easily:
Safety instructions Page 5
Installation Page 11
Wiring Page 45
Switching on the measuring device Page 85
Display and operating elements Page 64
“QUICK SETUP” –
Information about the “Quick Setup” menu can be found in the “Description of
Device Functions” manual, which is a separate part of this Operating
instruction!
Customer specific configuration Page 67 ff.
Complex measurement tasks require the configuration of additional functions,
which the user can individually select, set and adapt to his process conditions
via the function matrix.
All functions are described in detail, as is the function matrix itself, in the
“Description of Device Functions” manual, which is a separate part of this
Operating Instruction.
Trouble-shooting Page 113 ff.
Always start trouble-shooting with the checklist on Page 113, if faults occur after
commissioning or during operation. The routine takes you directly to the cause of
the problem and the appropriate remedial measures.
Returning devices
If you return a measuring device to Endress+Hauser for repair or calibration, you
must complete the “Safety regulation” form and enclose it with the device. You
will find a preprinted “Safety regulation” form at the back of this manual.
To Next Page
Loading...
