Hardware Installation and Maintenance Manual 1–1
1 - INTRODUCTION
SpectraSensors’ SS500/SS2000 products are high-speed, diode-laser based
extractive analyzers designed for extremely reliable monitoring of moisture
and carbon dioxide in natural gas applications. To ensure that the analyzer
performs as specified, it is important to closely review the installation and
operation sections of this manual. This manual contains a comprehensive
overview of the SS500/SS2000 analyzer and step-by-step instructions on:
• Getting familiar with the analyzer
• Installing the analyzer and sample conditioning system (SCS)
• Maintaining and troubleshooting the system
For instruction on operating the analyzer through firmware programming,
please consult the Firmware Operations Manual.
Who Should Read This Manual
This manual should be read and referenced by anyone installing, operating or
having direct contact with the analyzer.
How to Use This Manual
Take a moment to familiarize yourself with this manual by reading the Table
of Contents.
There are a number of options and accessories available for the SS500/SS2000
analyzers. This manual has been written to address the most common options
and accessories. Images, tables and charts are included to provide a better
understanding of the analyzer and its functions. Special symbols are also used
to provide the user with key information regarding the system configuration
and/or operation. Pay close attention to this information.
Conventions used in this manual
In addition to the symbols and instructional information, use “hot links” to
quickly navigate between different sections. These links include table, figure
and section references and are identified by a pointing finger cursor when
rolling over the text. Click on the link to navigate to the reference.
General Warnings and Cautions
Instructional icons are provided in this manual to alert the user of potential
hazards, important information and valuable tips. Following are the symbols
and associated warning and caution types to observe when servicing the
analyzer. Some of these symbols are provided for instructional purposes only
and are not labeled on the system.
To Next Page
Loading...
