Endress+Hauser SpectraSensors SS500 - Spare Parts; Table A-3 Replacement Parts for SS500;SS2000

Specifications
Hardware Installation and Maintenance Manual A
–13
Spare Parts
Below is a list of spare parts for the SS500/SS2000 analyzers with
recommended quantities for 2 years of operation.
Due to a policy of continuous improvement, parts and part numbers may
change without notice. Not all parts listed are included on every analyzer. When
ordering, please specify the system serial number (SN) to ensure that the
correct parts are identified.
Table A–3 Replacement parts for SS500/SS2000
Part Number Description
2 Year
Quantity
Electronics
0190217106 Cable, External, Serial (RS-232C) 1
8000002199
Temperature Control Board
1
1. Contact SpectraSensors service department before attempting replacement. Replacing this compo-
nent without technical support could cause damage to other components. Refer to “Service Con-
tact” on page B-22.
-
2900000450
4-20 mA Current Loop Board (not for 12 VDC analyzer)
1
-
2300000030
4-20 mA Current Loop Board (for 12 VDC analyzers)
1
-
1100002128
Kit, 2nd 4-20 mA Current Loop Board (not for 12 VDC)
1
-
0190216300
Power Supply, 12 VDC
1
-
0190216400
Power Supply, 24 VDC
1
-
8000002692
Power Supply, 100-240 VAC 50/60 Hz, CSA
1
-
0190230011
Keypad Assembly
1
-
0190231000
Display Assembly
1
-
0219900005
Kit, O-rings Viton, 2-Pass Cell
1
1
0219900011 Kit, Fuse, AC, DC 1
0900002146 Stainless Steel Mirror (0.1 m and 0.8 m cells only) -
Pressure Sensor Options
5500002041 Pressure Sensor, 30 PSIA, 5V, 1/8” MNPT DIN4365
NACE
1
6000002244
Cable, Pressure/Temperature, EXT, 22”
1
1
Maintenance
0219900001 Spares Kit, (O-rings, Fuses), (Domestic U.S.) 1
0219900005 Spares Kit, (O-rings, Fuses), (International) -
0219900007
Cleaning Kit (Domestic U.S./Canada)
1
1
0219900017
Cleaning Kit (International)
1
1