Endress+Hauser TOCII CA72TOC - Page 110

Maintenance TOCII CA72TOC
110 Endress+Hauser
8 1. Install the hose at the injection unit.
2. Check that the hose is correctly
inserted in the magnetic valve 8.
3. Press the [E] key.
9 The carrier gas valve MV7 (relay #7) is
opened as soon as 85% of the set
temperature is reached.
The system flushes permanently with
carrier gas.
Sample conditioning takes place (strip
chamber) after the furnace is being
heated.
Operation starts automatically.
Step Display Description
COMBUSTION PIPE
RE-CONNECT HOSE P2
[E] TO CONFIRM
XXX
XXX
COMBUSTION PIPE
TEMPERATURE = °C
IR = ppm