Endress+Hauser TOCII CA72TOC - Display and Keypad

Operation TOCII CA72TOC
28 Endress+Hauser
5.2 Display and keypad
a0007996
Fig. 10: Display and operating elements
1 Diaplay, 16 rows a 40 characters
2Keyboard
3 Arrow keys (cursors)
4 Function key"Measuring"
5 Function key "Service"
6 Function key "Programming"
7 Function key "Help"
8 Key "Enter"
9 Key "Clear"
1
2
3
4
5
6
7
8
9
"Operation" key
Pressing the "Operation key" takes you back to the measuring mode.
The display shows the measured value trend of the last six hours in graphic
form.
"Service" key
Pressing the "Service key" takes you to the maintenance mode.
The menu contains the following items:
•Pumps
• Calibration
•Cleaning
• Filter
"Programming" key
Once you have pressed the "Programming key" and entered the four-digit
code, you will be taken to the programming menu.
The menu contains the following items:
•Setting
You can configure the measuring device here.
•Lists
You can visualize the reports and alarm messages on the display here.
•Test
You can use test programs to test the functions of the device here.
Arrow keys
The arrow keys help you position the cursor on the screen.
The "right" arrow key allows you enter negative values for certain parameters.
A minus sign appears once this key has been pressed.