Endress+Hauser TOCII CA72TOC - Menu Test - Test of Outputs

Commissioning TOCII CA72TOC
44 Endress+Hauser
6.3.12 Menu TEST - TEST OF OUTPUTS
Step Display Description
1
2 1. Select the desired outputs.
2. Press the [E] key.
3 Current output
Sets the analog current outputs to any
value between 0 and 20 mA.
Pumps
Parameter for testing the function of the
pumps
Switch outputs
Displays the switching status of the
switch outputs (see the following table).
SETTING
LISTS
PROGRAMMING
TEST
TEST OF INPUTS
TEST OF OUTPUTS
TEST FREQUENCY I/O
TEST COM2
MEASUREMENT OFF
TEST O U T P U T S
DC-SIGNAL
DIGITAL OUTPUTS
PUMPS
0.0 mA
0.0 mA
TEST DC-SIGNAL
CHANNEL NO. 1
CHANNEL NO. 2
xxx.x %
xxx.x %
xxx.x %
xxx.x %
xxx.x ml
xxx.x ul
xxx.x ul
xxx.x ml
TEST PUMPS
PUMP NO. 1
PUMP NO. 2
PUMP NO. 3
PUMP NO. 4
PUMP NO. 5
PUMP NO. 1/2
ON
TEST DIGITAL OUTPUTS
ON / OFF : USE ANY KEY
SWITCH CHANNEL : USE ARROW KEY
DO-NO. 1
DO-NO. 2
DO-NO. 3
DO-NO. 4
DO-NO. 5
DO-NO. 6
DO-NO. 7
DO-NO. 8
OFF
ON
OFF
OFF
OFF
ON
OFF
OFF
DO-NO. 9
DO-NO. 10
DO-NO. 11
DO-NO. 12
OFF
ON
OFF
OFF