Endress+Hauser TOCII CA72TOC - Menu Setting - Set Clock; Menu Setting - Alarm Limits

Commissioning TOCII CA72TOC
36 Endress+Hauser
6.3.2 Menu SETTING - SET CLOCK
This section describes how you enter the date and the time.
Select the programming mode for this purpose.
6.3.3 Menu SETTING - ALARM LIMITS
Use this function to enter the limit values for the high alarm and low alarm.
a0012579-en
Fig. 16: "Programming" menu
Step Display Description
1
2 1. Enter the date with the numeric
keypad.
2. Press the [E] key.
3. Enter the time with the numeric
keypad.
4. Press the [E] key. The display starts
showing the seconds.
5. Press the [E] key.
SETTING
LISTS
PROGRAMMING
TEST
RANGE DATA
SET CLOCK
ALARM LIMITS
BASIC DATA
SET DEFAULTS
MEASURING SITE
DATE
TIME
mm.dd.yyyy
08/14/2008
hh.mm.ss
15:34:22
SETTING
LISTS
PROGRAMMING
TEST
RANGE DATA
SET CLOCK
ALARM LIMITS
BASIC DATA
SET DEFAULTS
MEASURING SITE
Parameter Unit Factory
setting
Description
HIGH ALARM LIMIT mg/l 12000 Use this function to specify the alarm value for when the
value is overshot.
LOW ALARM LIMIT mg/l 0 Use this function to specify the alarm value for when the
value is undershot.