THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO,
USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. PRINTED COPIES WILL BE CONSIDERED UNCONTROLLED.
AW000873-G 51
9.8.3 Wi-Fi Signal Status
The Wi-Fi module cannot receive messages or DR events until it is provisioned using Energate’s Consumer Connected
Demand Response™ (CCDR).
After the Wi-Fi module is provisioned, the radio link status indicator at the top right of the Temperature or Energy
home screen displays the status of the Wi-Fi signal. The following indicators can be displayed to the right of the signal
quality bars:
W: A Wi-Fi module is installed and configured.
D: Both a Wi-Fi module and a ZigBee network are configured.
Z: A ZigBee network only is configured.
To Next Page
Loading...
