Upload configuration
Page 64
When uploading through Entis Pro, the CIU Plus must be connected
through HostPort 1.
Changed
The Changed status can be ‘Y’ or ‘N’ (Yes/No). The status is ‘Y’ if a
new CIU is created or if any CIU setting is changed. The CRC status
and the Changed status can change independently.
Press the ‘Monitor’-button to view communication. The following
window is shown. For details see the “ Communication setup” chapter.
Press to show Kill CRC’s window. In case you want to force a full
Upload for the selected CIU.
Always grayed.
Press the ‘Check CRC’-button to refresh the CRC status of the
highlighted CIU. This means that the overall CRC is fetched from the
CIU and compared with the stored CRC in the database.
Press the ‘Upload’-button to upload the settings of the
highlighted CIU.
To Next Page
Loading...