Enterasys SecureStack C2 C2G124-48P - Appendix A: Specifications; C2 G124-48 P;C2 H124-48 P Switch Specifications; Console Port Pinout Assignments; Switch Specifications

SecureStack C2 Installation Guide A-1
A
Specifications
Thisappendixprovidesinformationaboutthefollowing:
Enterasys N etworksreservestherighttochangethespecificationsatanytimewithout
notice.
C2G124-48P/C2H124-48P Switch Specifications
Table A‐1providestheI/Oports,processorsandmemory,physical,andenvironmental
specificationsfortheC2G124‐48PandC2H124‐48P.
For information about... Refer to page...
C2G124-48P/C2H124-48P Switch Specifications A-1
Mini-GBIC Input/Output Specifications A-3
Gigabit Ethernet Specifications A-4
Console Port Pinout Assignments A-7
Regulatory Compliance A-7
Table A-1 Switch Specifications
Item Specification
C2G124-48P
RJ45ports 1 through 48 Forty-eight, 10BASE-T/100BASE-TX /1000BASE-T compliant
ports with auto-sensing and auto-negotiation via RJ45
connectors. These ports also support 802.3af PoE connections.
SFP ports 45 through 48 Four slots that support optional Mini-GBICs for 1000BASE-T
Gigabit copper and 1000BASE-FX fiber-optic connections.
When an SFP transceiver (Mini-GBIC) that is installed in ports 45
through 48 establishes a link, the associated fixed front panel
RJ45 10BASE-T/100BASE-TX /1000BASE-T port is disabled.