Envision One cDLM® User Manual
TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15
8.11 Envision One RP®
All files to be printed must pass through Envision One RP model processing software before transferring to Envision
One printer. Once the models are loaded, automatically fixed, oriented, and supported in Envision One RP, they
may be transferred to the printer as a folder containing a series of images and files. This information is used by the
printer to build three-dimensional models.
With each printer we send a USB drive containing the following program and data:
• Envision One RP® Software
• Buildstyles for the printer (.bsx)
You will find information on how to install and operate the Envision One RP® in the Envision One RP® User Guide
provided with your printer.
To Next Page
Loading...