Envision One cDLM® User Manual
TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15
Annex 2: Quick Start Guide
Prerequisite
• Your STL file has been exported from your CAD program.
Step-by-step:
1. Open the *.stl file in Envision One RP®. See the Envision One RP® User Guide provided with the printer
for details.
2. Use automatic placement to place parts.
3. Generate supports.
4. Generate job in Envision One RP® and save it in to the folder.
5. Make sure that the printer is on and plugged into the network.
6. Locate the printer in the local network.
7. Copy job to printer.
8. Attach the build platform to the printer.
9. Insert the material tray with material into printer.
10. Close the hood.
11. Load job file.
12. Start the job.
To Previous Page
Loading...