Envision One cDLM® User Manual
TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15
12.2.11 Filtering the Material
It is recommended to filter the material after each failed build. Use a paint strainer and run your
material through it. The paper paint strainers are the most suitable, as they can be discarded
after each use.
Do not use a paint strainer that requires cleaning, as cleaning solutions can contaminate and
ruin material.
12.3 Auxiliary Materials and Consumables
Materials have varying shelf lives (between 6-12 months). You will likely use all of the material
before it expires.
Consumables such as material trays and material can be ordered on the Contact Us page of the
EnvisionTEC website. If your printer was purchased through a reseller or distributer, contact them
directly for additional supplies.
Figure 18: Paint strainer
To Next Page
Loading...