Epson AcuLaser C3900N - Page 105

Item Description
Duplex
If Long-Edge Binding is selected, the pages will be printed on both sides of the
paper for long-edge binding.
If Short-Edge Binding is selected, the pages will be printed on both sides of the
paper for short-edge binding.
Choices: Off, Short-Edge Binding, Long-Edge Binding
Default: Off
Configuration Menu Equivalent:
PAPER MENU - DUPLEX
Output Tray Displays the name of the output tray.
Copies Specifies the default setting for number of copies to be printed.
Range: 1-9999
Default: 1
Configuration Menu Equivalent:
PAPER MENU - COPIES
Paper Size Specifies the default setting for the size of paper.
Configuration Menu Equivalent:
SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER SIZE
Width
Specifies the paper width when Paper Size is set to Custom Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE - WIDTH
Length
Specifies the paper length when Paper Size is set to Custom Size.
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE - LENGTH
Paper Type Specifies the default setting for the type of paper.
Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Envelope, Postcard,
Letterhead, Glossy 1, Glossy 2, Single Side Only, Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER TYPE
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 105