Self-signed Certificate Setting
Item Description
Common Name Identifies the Common Name for the printer, to be used in creation of an SSL
Certificate. It is comprised of “Printer Host Name. DNS Server”. If DNS Server is
un-available, only the host name is used as Common Name.
Note:
This text is read-only.
Organization Specify the name of the group or organization.
Range: 1 to 63 characters
Organization Unit Specify the name of the post.
Range: 1 to 63 characters
Locality Specify the name of the municipality.
Range: 1 to 127 characters
State/Province Specify the name of the state or province.
Range: 1 to 127 characters
Country Specify the name of the country as a country code regulated by ISO03166.
Range2 characters
Email Address Specify the e-mail address.
Range: 1 to 127 characters
Validity Start Date Displays the current time.
Validity Period Specify the period of validity.
Range: 1 - 3650 (day)
Default: 1
Encryption Strength Specify the encryption level.
Choices:
❏ AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
❏ 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
❏ RC4_128bits, DES_56bits or RC4_40bits
Default: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
Create button Creates the self-signed certificate.
Note:
A few minutes are needed in order to create the certificate.
Back button
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 144
To Next Page
Loading...
Need help?
General