Certificate Request
Item Description
Certificate Request Displays the data that should be submitted to the certificate signing authority.
This is called CSR (Certificate Signing Request). This data is to be submitted to the
certificate signing authority by the user.
Save button Click to save the data for requesting the certificate with the specified name.
OK button
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Install a Certificate
Item Description
Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area.
Next button
Click to display the Network - SSL/TLS - Encryption Strength Setting page.
Back button
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Cancel button
Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS
Information page.
Encryption Strength Setting
Note:
This menu item appears if a certificate is installed.
Item Description
Encryption Strength Specify the encryption level.
Choices:
❏ AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
❏ 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
❏ RC4_128bits, DES_56bits or RC4_40bits
Default: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
Create button Click to specify the encryption level.
If the Network - SSL/TLS - Install a Certificate page was previously displayed,
the certificate is installed.
Back button Returns to the previous screen.
Cancel button
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 146
To Next Page
Loading...
