Epson AcuLaser C3900N - Page 147

Remove a Certificate
Note:
This menu item appears if a certificate is installed.
Item Description
OK button
Click to display a confirmation message. Click OK in the confirmation message to
delete the certificate.
Back button
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Cancel button
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Mode Using SSL/TLS
Note:
This menu item appears if a certificate is installed.
Item Description
Mode Using SSL/TLS Selects the SSL transmission mode.
Choice: Disable, Enable
Default: Disable
Apply button Click to apply the setting specified beside “Mode Using SSL/TLS”.
Clear button Resets all configuration settings to previous values.
Back button
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Cancel button
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Authentication
User Authentication
Note:
❏ This page appears only if an optional hard disk drive is installed.
❏ When User Authentication or Account Track is set to On and Public Access is set to Restrict on
this page, printing is not possible except from a host where authentication settings can be specified
(Windows printer driver). In addition, resources (fonts, color profiles and form overlays) can no
longer be downloaded and firmware can no longer be updated.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 147