4. – (If Synchronize User Authentication & Account Track is set to Do Not Synchronize and
Account Track Method is set to Account Name & Password in the Network - Authentication
- User Authentication page) Type in the account name and account password in the Account
Name and Account Password text boxes.
– (If Synchronize User Authentication & Account Track is set to Do Not Synchronize and
Account Track Method is set to Password Only in the Network - Authentication - User
Authentication page) Type in the account password in the Account Password text box.
Note:
When Synchronize User Authentication & Account Track (in the Network - Authentication -
User Authentication page) is set to Synchronize, Account Name and Account Password will not
be displayed in the login page even if Account Track is set to On.
5. Click the Log in button.
Account Track Mode
Note:
To enter Account Track Mode, log on in Administrator mode, set Account Track (in the Network -
Authentication - User Authentication page) to On, and then register a new account in the System -
Authentication - Account Track Registration - New Registration page. For details, refer to
“Account Track Registration” on page 93 and “User Authentication” on page 147.
1. Select Account.
2. – (If Account Track Method is set to Account Name & Password in the Network -
Authentication - User Authentication page) Type in the account name and account password
in the Account Name and Account Password text boxes.
– (If Account Track Method is set to Password Only in the Network - Authentication - User
Authentication page) Type in the account password in the Account Password text box.
3. Click the Log in button.
Administrator Mode
In order to change any configuration settings through Web-Based EpsonNet Config, you must first
enter Administrator Mode.
1. Select Administrator.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 70
To Next Page
Loading...
