Time Adjustment Settings
Item Description
Time Adjustment Select whether or not the time is automatically adjusted with NTP.
Choices: Enable, Disable
Default: Disable
NTP Server Address Specifies the NTP server address.
IPv4 address, IPv6 address or FQDN (Fully Qualified Domain Name) can be
specified.
Range: Up to 63 characters
Default: 0.0.0.0
Port Number Specifies the NTP server port number.
Range: 1 - 65535
Default: 123
Time Zone Specifies the time difference from GMT.
Range: -12:00 - +13:00
Default: 0:00
Adjustment Time Shows the last modification date and time.
Default: Unknown
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Admin Password
Item Description
Current Password Type in the current password.
Range: Up to 16 characters
New Password Sets a new password to enter Administrator Mode.
Range: Up to 16 characters
Note:
Passwords can be set to any string of numbers and letters (uppercase and
lowercase) up to 16 characters in length.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 96
To Next Page
Loading...
