Note:
As many as 100 clients (users and an administrator) can log on to Web-Based EpsonNet Config at the
same time. These can be logged on as Public User, Registered User or Administrator.
However, no more than one client at a time can be logged on as Administrator.
Language Setting
If necessary, the display language used for Web-Based EpsonNet Config can be changed.
Public User Mode
In Public User Mode, you can view configuration settings but not change them.
1. Select Public User.
2. Click the Log in button.
Registered User Mode
In Registered User Mode, you can view configuration settings but not change them.
User Authentication Mode
Note:
To enter User Authentication Mode, log on in Administrator mode, set User Authentication (in the
Network - Authentication - User Authentication page) to On, and then register a new user in the
System - Authentication - User Registration - New Registration page. For details, refer to “User
Registration” on page 91 and “User Authentication” on page 147.
1. Select Registered User.
2. Type in the user name and user password in the User Name and User Password text boxes.
3. If Account Track (in the Network - Authentication - User Authentication page) is set to On,
continue with step 4. If it is set to Off, continue with step 5.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 69
To Next Page
Loading...
