2. Click the Log in button.
3. Type the password in the Admin Password text box.
Note:
Default password is set to “administrator”; however, once you have logged on in Administrator
Mode, the password can be specified in the System - Admin Password window.
4. Click OK button.
Viewing Printer Status
System Page
On this page you find printer status and current configuration settings, printer identification, and
links to all other web pages.
Note:
All of the information displayed on the System page is read only.
Device Information
Summary
Item Description
Memory Displays the amount of memory installed in the printer.
HDD If an optional hard disk drive is installed in the printer, displays the size of the hard
disk.
Duplex Indicates wether the duplex unit is installed on the printer.
Paper Source Identifies the paper feed units installed on the printer.
Note:
Tray3 appears only if the optional 500-sheet paper cassette unit is installed.
Output Tray Identifies the output tray installed on the printer.
Network Lists the installed printer interface (Ethernet 10Base-T/100Base-TX/1000Base-T).
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 71