3. Right-click the organization or organizational unit container where you will create the printer
agent, and then click NDPS Printer on the Create submenu.
4. In the NDPS Printer Name box, enter the printer name.
5. In the Printer Agent Source column, select Create a New Printer Agent, and then click the
Create button.
6. Check the printer agent name, and then in the NDPS Manager Name box, browse through the
NDPS manager names, and register one.
7. In the Gateway Types, select Novell Printer Gateway, and then register it.
8. In the Configure Novell PDS for Printer Agent window, select (None) for the printer type and
Novell Port Handler for the port handler type, and then register the settings.
9. In Connection type, select Remote (LPR on IP), and then register it.
10. Enter the IP address set for this machine as the host address, enter Print as the printer name, and
then click the [Finish] button to register the settings.
11. The printer driver registration screen appears. Select None for each operating system to complete
the registration.
Note:
For settings for the queue user rights, printer notification option, assignment of multiple queues, and
passwords, refer to the NetWare documentation, and set them as necessary.
Setting Up a Client (Windows) Settings When Using the NetWare Server
1. Open the printer’s Properties window.
2. In the port settings, browse the network, and specify the name of the created queue (or NDPS
printer name).
3. In the Printer Model list, specify the folder on the Software Disc that contains the printer driver
for the operating system and printer driver to be used.
4. Follow the on-screen instructions to complete the installation.
AcuLaser C3900 Reference Guide
Operation on NetWare 40
To Next Page
Loading...
