Epson AcuLaser C3900N - Paper Source Settings

Paper Source Settings
Item Description
Tray1 Paper Size Specifies the setting for the size of paper loaded into Tray 1.
Default: A4
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY1 - PAPER SIZE
Width
Specifies the paper width when Paper Size is set to Custom
Size.
Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY1 - CUSTOM SIZE - WIDTH
Length
Specifies the paper length when Paper Size is set to Custom
Size.
Range: 5.83 - 14.00 (inch) / 148 - 356 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY1 - CUSTOM SIZE - LENGTH
Paper Type Specifies the setting for the type of paper loaded into Tray 1.
Choices: Any, Plain Paper, Recycled, Thick 1, Thick 2, Label,
Envelope, Postcard, Letterhead, Glossy 1, Glossy 2, Single Side
Only, Special Paper
Default: Plain Paper
Configuration Menu Equivalent:
PAPER MENU - PAPER SOURCE - TRAY1 - PAPER TYPE
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 107