Epson AcuLaser C3900N - Tray Mapping Settings

Item Description
Tray2 Paper Size Indicates the setting for the size of paper loaded into Tray2.
Width
Indicates the paper width when Paper Size is set to Custom
Size.
Length
Indicates the paper width when Paper Size is set to Custom
Size.
Paper Type Indicates the setting for the type of paper loaded into Tray2.
Tray3
This item appears only if
an optional 500-sheet
paper cassette unit is
installed.
Paper Size Indicates the setting for the size of paper loaded into Tray3.
Paper Type Indicates the setting for the type of paper loaded into Tray3.
Tray Chaining
If Enable is indicated and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the same
size is automatically selected so printing can continue.
If Disable is indicated and the specified paper tray runs out of
paper, printing stops.
Tray Mapping Settings
Item Description
Tray Mapping Mode
If On is indicated, Tray Mapping function is used.
Logical Tray 0-9 Indicates the tray that is used for printing when a print job is received from
another manufacture’s printer driver.
PCL Settings
Item Description
Font Number Displays the default font in the PCL language.
Symbol Set Displays the symbol set used with the PCL language.
Lines Per Page Indicates how many lines are in a page in PCL language.
Font Point Size Displays the font size in the PCL language.
Font Pitch Size Displays the font pitch in the PCL language.
CR/LF Mapping Indicates CR/LF code definition in PCL language.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 79