Requirements
To use Web-Based EpsonNet Config, the following is required:
❏ Windows Server 2008/Server 2003/7/Vista/XP/2000
Mac OS X 10.3.9 or later
Red Hat Enterprise Linux 5, SUSE Linux Enterprise 5
❏ Microsoft Internet Explorer version 6.0 or later
Mozilla Firefox version 2.0 or later
Note:
You do not need an Internet connection.
❏ TCP/IP communication software (used by Web-Based EpsonNet Config) installed on your PC
❏ A network, to which both your PC and the printer are connected
Note:
You cannot access Web-Based EpsonNet Config using a local (USB ) connection.
Setting Up the Printer Web Page
Setting up the printer web page to run on your network involves two basic steps:
❏ Determining the name or address of your printer
❏ Setting up the “no proxy” preferences in your browser software
Determining the Printer Name
The printer web page can be accessed in two ways:
Note:
The printer names can also be determined via WINS if the network supports it.
❏ Through the assigned name of the printer—This name comes from the IP host table (the filename
is hosts) on the computer system and is usually assigned by the system administrator (for
example, Epson AcuLaser C3900). It may be more convenient for you to use the printer name than
the IP address.
AcuLaser C3900 Reference Guide
Using Web-Based EpsonNet Config 63
To Next Page
Loading...
